15
© 2012 Directed. All rights reserved.
op er at ing the motor and the optional relay is installed.
Remote Start Safe-lock
Remote start safe-lock makes sure the doors are locked while the en-
gine is running and after, even if they are unlocked when remote start
is activated.
Note:
Door locks may require additional parts and labor.
Disabling Remote Start
Remote start can be disabled by moving the Toggle Switch to the Off
position. If remote start is attempted while Off, the engine will not
start. (See
“Remote Start Faults”
under
Remote Start Features
) move the
switch back to the On position to resume normal operation.
Remote Start Faults
For user safety, the system must be properly c
onfigured or remote start will not activate. A Remote Start Fault may be
caused by any of several configuration issues. Refer to the table below
for the command type and parking light flashes that will identify the
configuration issue and solution.
Flashes *
Possible Fault
Solution
5
Brake on
Release foot brake
6
Hood open
Close hood
7
After performing Remote Start
command - MTS not enabled
Enable MTS mode
8
Toggle Switch off
Turn switch on
* Refers to the number of parking light flashes.
Summary of Contents for 4104A
Page 32: ......