Auto Mate 4104A, Owner'S Manual, Page: 21 / 32

18 © 2012 Directed. All rights reserved.
Remote Pairing
The system comes with remotes that have been programmed to the
unit. The unit can store up to 4 different remotes in memory.
The following instruction will step you through the remote pairing op-
eration.
Remote Control RF Learning
1. Turn the key to the ON position.
2. Press/release once and then press/hold the Control Button on
the system’s Control Center (one horn sound confirms selection)
3. The button can be released.
4. Press/hold
the remote button until the transmit LED turns on
solid (10 seconds).
5. The horn emits one sound to confirm learning.
6. Repeat for each remote control to be learned (up to four).
7. Turn the ignition off or wait 60 second to exit learning, the horn
emits 2 sounds to confirm.
The learn routine Exits if any of the following occurs:
s
The ignition is turned off.
s
There is no activity for 60 seconds.
s
The control button is pressed too many times.