23
© 2012 Directed. All rights reserved.
Prepare the system
1.
Open
a door
.
2.
Turn
the ignition on.
3.
Press
and release then
press
and
hold
the control center button.
The control center LED flashes and the siren chirps one time to
confirm the system is prepared.
4.
Release
the control center button and proceed below.
Note:
Begin pairing within 60 seconds or the system will exit (indi-
cated by a long siren chirp) and will need to be prepared again.
Prepare the remote control
Select the desired Car 1 (Default) or Car 2 operation before proceed-
ing.
1.
Press
and
hold
the
button of the remote control until a long
beep is emitted and
MAIN MENU
is displayed (If programmed to
operate two systems, confirm the correct car 1 or car 2 text and
beeps at 3 seconds).
2. Release
the button to view the main menu.
REMOTE SETUP
is
displayed.
3.
Press
and release the
button two times.
PAIR REMOTE
is
displayed.
4.
Press
and
hold
the
button until
PAIR
is displayed, and then
release it.
5.
Press
and
hold
the
button until the siren emits a long chirp.
SUCCESS
is displayed with a sequence of chimes.
Note:
If
FAILED
is displayed, make sure the system is still pre-
pared and repeat step 5 until successful.
