Page 4
Quick Installation Guide
The wire shall be stripped 8 mm and
then the cage clamp shall be opened
with a small screwdriver in the slot
above the wire connection.
Then, simply insert the wire into its
connection slot and release the cage
clamp by removing the small
screwdriver. This will produce a secure
gas-tight connection on wire sizes
ranging from 0.08 -1.5 mm
2
.
J1939 CANbus
connections
The terminal connections are
numbered as follows:
Terminal
Signal
1
CAN H
2
Ground
3
CAN L
These are labeled on the unit case.
Summary of Contents for NMEA2000/J1939
Page 1: ...Manual 1140131 Quick Installation Guide Gateway NMEA2000 J1939 ...
Page 2: ......
Page 6: ......
