4.9.5 Help
Submenus for troubleshooting and panel version information, such as firmware version and
IP address.
Troubleshooting
This submenu has troubleshooting information for the panel itself in addition to every RIO
expansion unit connected.
Select the icon that represents the area of interest.
Troubleshooting Diagnostics
Additional CPU related Information; Temperature, Frequency and Load.
Version Information
This page displays panel hardware version, software version, kernel version and also the
engine ECM software version (if connected to the J1939 CANbus).
Of special interest here is the panel
IP address
, which is necessary when connecting to the
panel using a PC.
5 RP 210E/220E/206E Remote Panel
5.1 Introduction
The RP 210E, RP 220E and RP 206E are remote panels for DCUs in the Marine Pro 200
and 400 series.
It reads the configuration from the DCU Engine Controller it is connected to. If the DCU has
a configuration change, then the RP Remote Panel will automatically adapt.
The RP 210E can monitor and control one DCU engine panel only.
The RP 220E can monitor and control two DCU engine panels.
The RP 206E can monitor two DCU engine panels. It can not control start/stop.
Page 16 (20)
