Select any of the built-in wallpapers as a background for instruments, menus and popup
dialogs.
Connect a PC
The panel has an inbuilt DHCP server, and thus can issue an IP address to a PC that is
configured to receive a dynamic IP address in a company network.
Set the Start- and End IP to be outside of the panel’s current IP address, and press OK.
Administration
This section covers deeper configuration options of the panel, and is not covered in this
manual.
4.9.2 Screen Backlight
Adjust screen backlight intensity for varying light conditions.
4.9.3 Log & Counters
There are submenus for engine operating hours, event log and service intervals.
Counters
The submenu has the engine hours, in total, since start and since the last reset.
The
Since Start
value is automatically reset every time the engine makes a new start.
The
Since Reset
values can be reset manually using the button provided.
Event Log
All panel events are stored internally, and can be monitored here.
Select an event to see when it first appeared, when it was acknowledged (if applicable for
that event) and when it disappeared (again, if applicable).
Engine Service Interval
If engine service intervals are configured, then this page displays how many hours until the
next service.
Page 14 (20)
