manualshive.com logo in svg

AUTHOR Alarm IGLA 200, Quick Start Manual

Share
Download
AUTHOR Alarm IGLA 200 Quick Start Manual Download Page 12

10

4.  Authorize in the system via PIN-code.
5.  Activate the PIN-code change mode (press the 

accelerator pedal as far as it can go (or other control 

element*), enter current PIN-code and release the 

accelerator pedal). The indication signal will start 

flashing once in 3 seconds.

6.  Press the service button 1 time. 
7.  Press «+» button to add new device.

* See the annex at http://author-alarm.com.

!

8.  In a pop-up window enter 

the Bluetooth pairing 

code indicated on the 

plastic card supplied as a 

part of the set. After this 

your smartphone will be 

connected to IGLA system.

9.  Press the «Key» button in the center of the screen 

in order to activate the key fob mode (the button 

lightning will change from grey to orange color).

10. Switch off the ignition.

During the pairing procedure it is recommended to 

put your smartphone as closer to the IGLA system 

as possible. The interaction radius in pairing mode 

is limited (distance should be less than 1 meter).

Summary of Contents for IGLA 200

















Reviews:

No comments

Brands by name

Popular brands

Load more brands