manualshive.com logo in svg

AUTHOR Alarm IGLA 200, Quick Start Manual

Share
Download
AUTHOR Alarm IGLA 200 Quick Start Manual Download Page 11

9

For authorization via smartphone download and install 

Author ID

 app via links bellow (or scan QR-code):

https://itunes.apple.com/ru/app/author-id/id1144594689?mt=8
https://play.google.com/store/apps/details?id=com.dma.author.

authorid

Before the pairing your smartphone to the IGLA 

system make shure that it’s not connected with 

another car systems via Bluetooth (multimedia 

system, wireless headset, etc.) and there are no 

active key fobs near the system (remove all the 

batteries).

In order to connect your smartphone to the system 

it is necessary to do the following (during connection 

procedure only one smartphone can be added at a time):
1.  Switch on Bluetooth in your smartphone.
2.  Start 

Author ID

 app.

If you receive a message that your smartphone does 

not support the key fob mode (Bluetooth Peripheral 

mode not supported), it is recommended to enable 

an alternative mode and pair your smartphone to 

the IGLA system in this mode.*

3.  Switch on the ignition without starting the engine.

!

* See the complete operating manual at http://author-alarm.com.

!

Summary of Contents for IGLA 200

















Reviews:

No comments

Brands by name

Popular brands

Load more brands