37
3. Tap the
○
>
button on the right of
Trigger Type
bar and select the
required trigger mode.
4. Tap the
○
>
button on the right of
Duration
bar and select a length
of time.
5. Tap the
○
>
button on the right of
Trigger Point
bar and select a
relative percentage of a record length to be reserved before the
data recording start point.
6. Tap
Done
to save the setting and return to the Live Data screen; or
tap
Cancel
to cancel without saving and exit Setting.
Done Button – confirms and saves the setting, and returns to the Live
Data screen.
Cancel Button – cancels the setting operation and returns to the Live
Data screen.
Active Test
The Active Test function is used to access vehicle-specific subsystem and
component tests. Available tests vary depending on the manufacturer, year,
and model, and only the available tests display in the menu.
During an active test, the tester outputs commands to the ECU in order to
drive the actuators. This test determines the integrity of the system or parts
by reading the engine ECU data, or by monitoring the operation of the
actuators, such as switching a solenoid, relay, or switch between two
operating states.
Selecting Active Test opens a menu of test options that varies by make and
model. Selecting a menu option activates the test. Follow on-screen
instructions while performing tests. The content and pattern of the
on-screen information vary according to the type of test being performed.
Some toggle and variable control tests display Active Test Controls at the
top of the screen with data stream information below, or vice versa.
