31
Search – tap to search for the fault code related information on
Google.
ESC – tap to return to the previous screen or exit the function.
Erase Codes
After reading the retrieved codes and making appropriate vehicle repairs,
use this function to erase vehicle codes.
To erase codes
1. Tap
Erase Codes
from the Function Menu.
2. A warning message displays to advise of data loss if this function is
completed.
a) Tap
Yes
to continue. A confirming screen displays when the
operation is successfully done.
b) Tap
No
to exit.
3. Tap
ESC
on the confirming screen to exit Erase Codes.
4. Perform the Read Codes function again to check if codes have
been erased successfully.
Live Data
When this function is selected, the screen displays the data list for the
selected module. The items available for any control module vary by vehicle.
The parameters display in the order that they are transmitted by the ECM,
so expect variation between vehicles.
Gesture scrolling allows for quick movement through data list. Using one or
two fingers, simply swipe the screen up or down to locate the data you want.
The figure below shows a typical Live Data screen:
