iv
Do NOT dip the product into water or avoid being caught by water.
If the enclosure is caught by water or other liquid, dry it immediately. If water
or other liquid enters the inside of the instrument, power off the product at
once. Continuous use may result in product damage.
Clean the dust on the adapter plug and the data line regularly.
When it is exposed to dusty and dump environment for a long time, the dirt
surrounding the electric equipment will accumulate moisture, which may
cause short circuit and fire.
Use the included adapter to charge the product.
Use of any other power supply accessories may cause serious
consequences such as equipment overheating, electric shock, fire, or
leakage, as well as explosion of chemicals inside the battery.
Do NOT use grinding additives, isopropanol or gaseous organic
solvents to clean the enclosure of the device.
Such operation may damage the enclosure of the device.
The product temperature may increase after charging for a long
time.
You may feel scorching heat when touching the sensors.
Problem caused by water condensation
Do NOT bring the instrument into low temperature environment from high
temperature environment or from low temperature environment to high
temperature environment instantly. Otherwise, water condensation may be
caused inside the instrument and the enclosure of the device. To avoid
condensation, the instrument should be put into attached instrument package
and taken out to use until it gradually adjusts to the ambient temperature. If
the product has water condensation inside, power it off immediately and
remove the battery. Otherwise, the instrument may be damaged. Operation
is not allowed before water condensation is got rid of.
Avoid impacting the product (such as collision and falling, etc).
Do NOT impact the product (such as collision and falling, etc). If not, the
product will be damaged.
