Autel MaxiDAS DS808 Page 98 User Manual Download

Page: 98 / 112

TeamViewer screen displays and the device ID is generated and
shown.

3. Your partner must install the Remote Control software to his/her

computer by downloading the TeamViewer full version program
online (

http://www.teamviewer.com

), and then start the software on

his/her computer at the same time, in order to provide support and
take control of the Display Tablet remotely.

4. Provide your ID to the partner and wait for him/her to send you a

remote control request.

5. A popup displays to ask for your confirmation to allow remote control

on your device.

6. Tap

Allow

to accept or tap

Deny

to reject.

Refer to the associated TeamViewer documents for additional information.

Summary of Contents for MaxiDAS DS808

















































































































Search results

Summary of Contents for MaxiDAS DS808

Reviews:

Related manuals for MaxiDAS DS808

Brands by name

Popular brands

Autel MaxiDAS DS808, User Manual

Search results

Summary of Contents for MaxiDAS DS808

Reviews:

Related manuals for MaxiDAS DS808

Brands by name

Popular brands