Autel MaxiDAS DS808 Page 10 User Manual Download

Page: 10 / 112

3. Power LED

– indicates battery level & charging or system status.

4. Vehicle Communication LED

– flashes green when the Display Tablet is

communicating/linking with the vehicle’s system.

The power LED displays different colors in response to the following
scenarios:

A. Green



Illuminates green when the Display Tablet is charging and the
battery level is above 90%.



Illuminates green when the Display Tablet is powered on and the
battery level is above 15%.

B. Yellow



Illuminates yellow when the Display Tablet is charging and the
battery level is below 90%.

C. Red



Illuminates red when the Display Tablet is powered on and the
battery level is below 15%.

Figure 2-2

Display Tablet Back View

5. Collapsible Stand

– extends from the back to allow hands-free viewing

of the Display Tablet.

6. Heat Sink

7. Built-in Battery

Summary of Contents for MaxiDAS DS808

















































































































Search results

Summary of Contents for MaxiDAS DS808

Reviews:

Related manuals for MaxiDAS DS808

Brands by name

Popular brands

Autel MaxiDAS DS808, User Manual

Search results

Summary of Contents for MaxiDAS DS808

Reviews:

Related manuals for MaxiDAS DS808

Brands by name

Popular brands