35
Note
Do not use other communication devices of the same frequency band at the
same time to prevent interference with the signals of the remote controller.
In practices, when the image transmission signals are weak, the Autel Explorer
App will display prompt messages. Adjust the antennas according to the
prompted instructions and ensure that the aircraft is in the place for best
communications.
5. Linking
When you buy a whole package that includes an aircraft and a remote controller,
the remote controller is already linked to your aircraft before delivery. You can
directly use the aircraft after you activate it.
In other cases, you need to manually link the remote controller to your aircraft.
Perform the following steps to do that.
1. Press the linking button next to the USB port on the right of the aircraft body to
let the aircraft enter the linking state.
2. Turn on the remote controller and launch the Autel Explorer App. Go to the
mission flight page, click the wheel icon on the upper right corner to go to the
settings menu. Click "Remote Controller -> Data Transmission and Image
Transmission Linking -> Start Linking" and wait for several seconds until the
linking is successful.
