29
This function is performed with key on engine off (KOEO). Do
not start the engine.
1)
Use the
SCROLL
button to select
Erase Codes
from
Diagnostics
Menu
and press the
ENTER/Exit
button. (Figure
4.3)
2)
A warning message comes up asking for your confirmation.
Figure 4.7
If you do not want to proceed with erasing codes, use
SCROLL
button to select
NO
to exit. A message of
“Command Cancelled!” shows up. Wait a few seconds or
press any key to return to
Diagnostic
Menu
.
3)
Press the
ENTER/Exit
button to confirm.
If the codes are cleared successfully, an “
Erase Done!
”
confirmation message shows on the display.
Figure 4.8
Erase Codes
Erase trouble codes!
Are you sure?
YES
NO
Erase Codes
Erase Done!
Press any key to con.
