Kaminkassette A70/50 / A70/60
6
english
Heating in between seasons
Heating the cassette fire in between seasons,
when the outside temperatures are higher, the flue
gases cannot escape completely and this may lead
to disturbances in the chimney draught, especially
if the temperatures are rising suddenly. The
cassette fire has to be charged with less wood and
the primary air has to be increased so that the
wood can burn down faster (with visible flames)
and thus the chimney flue can stabilize.
Chimney fire
Chimney fire may occur, due to sooting and
deposits in the chimney, if wrong or humid fuel are
used. Close all air inlets on the fireplace/chimney
immediately and call the fire brigade. Please have
an expert inspect your chimney for cracks and air-
tightness after the burning out of the chimney.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Gaskets
Description Nr.
drawing
A70/50
A70/60
Flat gasket 12 x 6 mm
1
718021
Round glas fibre gasket 14 mm
2
714223
Keramott
Description Nr.
drawing
A70/50
A70/60
Bottom Keramott left
3
715693
Bottom Keramott right
4
715694
Rear left, Keramott
5
715695 715761
Rear right Keramott
6
715696 715762
lateral Kermott left
7
715697 715760
lateral Keramott right
8
715699 715763
Keramott wood retainer
9
715698
Grate 10
716408
Other parts
Description Nr.
drawing
A70/50
A70/60
door glass
11
712715 715764
door bolt
12
715722-92
door handle
13
715710-29
BA1 spring
14
715778-15
Cassette fire lacquer
650002
Wood/coal igniter
640067
Glass cleaner ½ litre
640070
IMPORTANT:
Have defective parts replaced by your certified dealer only. This will guarantee that
your cassette fire functions properly and safely.
Convection air
The cassette fire A70/50 / A70/60 is equipped with two fans controlled by a thermostat. After approx. 20
minutes of operation the fans will switch on automatically, if the necessary temperature has been
reached. When the fire has gone out and the cassette fire cools down, the fans will automatically switch
off again as soon as the required temperature is reached.
Maintenance
Please use a specialized product such as our Thermohit glass cleaner for cleaning the glass. Lacquered
surfaces are to be cleaned only with a cloth (may be damp).
Cleaning
The cassette fire, flue outlets and smoke pipes should be cleaned and inspected for deposits every year –
if necessary more often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned
regularly by the chimneysweeper. Your chimneysweeper will inform you of the necessary inspection
intervals. An expert should inspect the cassette fire annually
.
order of Keramott installation acc. to numbering!
