M X 8 1 I N S TA L L AT I O N & O P E R AT I O N M A N UA L
PAG E 7
I N P U T C O N N E C T I O N S
For wiring balanced in, pin 2 is hot. Unbalanced wiring on the
microphone inputs is not recommended. Balanced input wiring
(shielded pair cable) is recommended.
Unbalanced RCA wiring should be keep as short as possible.
Typically less than 3m.
L I N E O U T P U T
The LINE output XLR can be used to connect up to 6 booster amplifiers.
Balanced wiring (shielded pair cable) is recommended.
NOTE: When wiring the LINE output as unbalanced,
Pin2 should be wired as hot and Pin1 should be wired
as ground/shield. Do not wire Pin3.
R E C O R D O U T P U T.
The Record output wiring should be kept as short as possible.
Typically less than 3m.
I N S TA L L AT I O N & T R O U B L E S H O OT I N G
T R O U B L E
L I K E LY C AU S E
R E M E DY
Power LED not on
Power not reaching unit
Check mains connection
Check mains fuse
Check power switch is on
Poor S/N ration
Incorrect gain structure
See setup guide
Distorted sound
Input is overloaded
Reduce input gain
Reduce input level at source
Output is being over driven
Reduce output volume
No sound but unit is on
Volume turned down
Check volume controls
Tones and/or VCA control does not work
Module not installed
Purchase optional modules
Condenser microphone does not work
Phantom power not switched on
Switch on phantom power
☛