915207
3
PERFORMANCE AND LIMITATIONS OF USE
The equipment has been tested in accordance with EN 360:2002 & as per VG11 RFU # 11.060
and has achieved the following performance levels:
EN 360:2002 test
Result/Comment
Clause 4.1
Design & Ergonomics
Achieves required performance as stated in EN
360:2002 (PASS).
Lanyard free from sharp or excessively abrasive
surface (PASS).
No unnecessary features which add significantly to
overall mass ( Pass).
Clause 4.2
Materials & Construction
Lanyard end terminated with a loop, for connection
to harness and fall arrest system (PASS).
Lanyard meets static strength requirement (PASS).
Clause 4.3
Locking after Conditioning(EN 364:1993)
After conditioning, it locks & remains locked until
released with 5 kg Max. (PASS)
Clause 4.4
Static Strength(EN 364:1993)
12kN sustained for 3 minutes without release
(Wire) (PASS). 15kN sustained for 3 minutes
without release (Webbing) (PASS).
Clause 4.5
Dynamic Performance(EN 364:1993)
When tested with the test mass of 100 kg,
The Arrest force <6.00 kN, Arrest distance <2.00 m
(PASS).
Clause 4.7
Corrosion Resistance (EN 364:1993)
Corrosion test in accordance with ISO 9227:1990-
24 hours (PASS).
AS PER VG11 RFU # 11.060
Result/Comment
1. Dynamic Performance:
a. Perpendicular to the edge
b. Lateral offset of 1.5 mtr
100 Kg mass held
Breaking force <6kN
Breaking distance less than 2 mtr
2. Dynamic Strength
a. Perpendicular to the edge
b. Lateral offset of 1.5 mtr
100 Kg mass held
3. Static Strength after each Dynamic
Strength test
f=3kN (Cable) 4.5 kN (Textile) 3 mints
