915207
2
Do not skip this instruction manual. Read the instruction manual carefully before using the
equipment. If failed in doing so it may cause serious Injury or Death.
Note: The user is advised to keep the user instructions document for the life of the product.
Manufacturer
:
Certification Body Ongoing :
Assessment Body
:
43 Frank St, Wetherill Park, NSW 2164 02 9757 2277
SATRA Technology Europe Ltd, Bracetown Business Park,
Clonee, Dublin D15 YN2P Ireland (Notified Body 2777)
SGS Fimko Oy, P.O. Box 30 (Särkiniementie 3), 00211
HELSINKI, Finland (Notified Body 0598)
The Retractable Fall Arrester for horizontal usage is classed as a Personal Protective Equipment
(PPE) by the European PPE Regulation (EU) 2016/425 and has been shown to comply with this
Regulation through the Harmonized European Standard EN 360:2002 & VG11 RFU # 11.060
This Retractable Fall Arrester for horizontal usage is designed to minimise the risk of/provide
protection against the danger of falling from heights. However, always remember that no item
of PPE can provide full protection and care must always be taken while carrying out the risk
related activity.
Please consult AS/NZS 1891.4 for selection, use, maintenance and training requirements.
• Self-Retracting Lanyard: Austlift 915220 and 915230 retractable lanyards are suitable for
applications where the unit is mounted overhead, the line will remain generally vertical during
use keeping it taught and limiting free fall to less than 0.6m (600mm).
• Self-Retracting Lanyard with Sharp Edge: Austlift 915207 and 915210 retractable lanyards with
sharp edge (SE) are suitable for applications where the lifeline remains generally horizontal
during use and possible free fall is limited to less than 1.5m. Sharp Edge (SE) retractable’s have
an additional shock absorbing element at the user attachment point to assist with absorbing
the impact over the edge and reducing the force on the user to below 6kN and removing the
additional force that may cause the cable or webbing to shear. Sharp Edge units are approved
for vertical and horizontal use.
SAFETY INFORMATION
This Retractable Fall Arrester can be used as a part of a fall arrest system or as a part of a restraint
system. If using as a part of fall arrest system, a suitable anchor point (above the user’s head, at
least 12kN) shall be used. Attachments to the anchor points and other equipment shall be made
using Karabiners to EN362 with a minimum 6kN gate strength or ANSI.
The equipment is to be used specifically in vertical as well as horizontal condition if it is Sharp
Edge (SE) marked.
• Material of the Lanyard:
for wire rope block - 4.8mm Galvanized steel wire.
for webbing block - 25mm polyester textile webbing.
POSSIBLE USAGE
