15
ALC UIM HPC-1/UPC-1 11320xx_19
www.austlift.com.au
USER INS
TRUCTION MANU
AL
LIFTING PLA
TE CLAMP
HPC
-1 & UPC
-1 SERIES
Use tools to knock the spring pin off, then pull the
hanger pin out.
Put the brake into the body of clamp and align
the center of the holes of brake and the body.
Use the tool to knock the hanger pin off,
then the main components are dismounted
including brake assembly.
Insert the the hanger pin and remember to
connect the spring pin and the rear spring pin.
Knock the corresponding
spring pin into the body.
Note: All structural repair or subsequent work to load-bearing components must be carried
out in accordance with AS4991.
Horizontal Plate Clamp Repair
1
2
1
2
3
Disassembly Steps
Reassembly Steps
