13
ALC UIM HPC-1/UPC-1 11320xx_19
www.austlift.com.au
USER INS
TRUCTION MANU
AL
LIFTING PLA
TE CLAMP
HPC
-1 & UPC
-1 SERIES
Align the eyelet hole, the body hole, and the
connecting rod hole so that the three holes are at
the same center point
Insert the mobile pin into the hole and pull the
brake to fit the groove (Figure 3)
Assemble the connector, the lower pin, the
spring, etc.
Reassembly Steps
Note: All structural repair or subsequent work to load-
bearing components must be carried out in accordance
with AS4991.
3
2
1
