www.austin-hughes.com
UM-CMS-03-S-Q121V1
P.37
Step 7.
Click
“ Enable “
in
“ SNMP agent “
to start the SNMP agent service
Step 8.
Select
“ v3 “
in
“ SNMP version “
& the SNMP v3 settings window appears as below :
Step 9.
Input
“ SNMP port “
. Default is 161.
Step 10.
Input “
sysContact
“. Default is human.being<[email protected]>
Step 11.
Input “
sysLocation
“. Default is Earth.
Step 12.
Input “
sysName
“. Default is CMS-03-S.
Step 13.
Click
“ Activate “
in User 1.
Step 14.
Select
“ Read Only “
or
“ Read & Write “
in User role :
Step 15.
Input the name of
“ USM user “
. Default is usm_user1
Step 16.
Select
“ None / MD5 / SHA “
in
“ Auth algorithm “
.
If you select
“ Read & Write “
in
“ User role: “
,
you MUST select
“ MD5 / SHA “
in
“ Auth algorithm “
Step 17.
Input the
“ Auth password: “
Default is “ 00000000 ‘
Step 18.
Select
“ None / DES / AES “
in
“ Privacy algorithm “
.
If the Auth algorithm is
“ NONE “
, NO privacy algorithm can be selected.
Step 19.
Input the
“ Privacy password “
Step 20.
If you want to receive trap message, select
“ Enable “ in SNMP trap
Step 21.
Input the
“ Trap Station IP “
&
“ Trap port “
Step 22.
Repeat step 13 to 21 for User 2 & 3.
Step 23.
Click
“ Apply “
to
fi
nish the SNMP v3 settings.
< 3.4 > SNMP Setup
