14
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
CARE AND MAINTENANCE
TROUBLESHOOTING
Storage
• When your pressure washing session has been
completed, turn off the power switch located on the
front of the pressure washer. Unplug the power cord
from the outlet. Turn off the water supply. Pull the
trigger on the spray gun 2-3 times to drain out the
excess water and to release any remaining water
pressure. Disconnect the garden hose adapter from
the water inlet.
DO NOT
allow the pressure washer to
run with no water flowing through it.
• Remove detergent bottle and clean completely.
Residual chemical will dry out in the container and
can cause the detergent injector to clog and prevent
function.
• Remove high pressure hose from spray gun.
•
Remove lance from the gun. Place the gun in the
holder on the side. Lances are placed into any of the
slots in the back of the unit. Make sure to discard
any remaining detergent from the bottle. Flush the
bottle and nozzle head with fresh water to prevent
clogging.
• Hook the power cord around the cord hook on the
right side of the machine when facing it.
• The pressure hose is stored on the hose hook
located on the back of the handle.
