background image

CARE AND MAINTENANCE

16

LIMITED WARRANTY

Printed in PRC

This Limited Warranty applies only to new products* distributed by Austech Industries Pty Ltd (“Austech Industries”).  It is a condition 

of this Limited Warranty Policy that the purchaser read the owner’s manual for the product and only use the product to the extent 

or for the purposes stated therein.  The purchaser must also ensure that all servicing requirements are completed as listed in the 

owner’s manual (said servicing is at the owner’s expense).  We recommend that all servicing is completed by an authorised service 

agent and that records of said servicing are retained by the purchaser as proof in the event of a warranty claim.  

 

Whilst the owner’s manual, packaging, and/or other documentation supplied with Austech Industries’ products may provide details 

in respect of a Limited Warranty, the terms set out herein supersede these matters, and this Limited Warranty applies in their place.  

This warranty is no less advantageous than otherwise described in such other documentation.

Austech Industries agrees, subject to the terms and conditions specified below, to repair or replace at Austech Industries’ cost, the 

product purchased by you when the product does not perform in accordance with its specifications during the limited warranty pe-

riod, due to any fault in manufacturing, materials and/or workmanship.  Austech Industries is not liable to repair or replace products 

that the purchaser uses in a manner that is inconsistent with the owner’s manual or in the circumstances set out in paragraphs 1.1 – 

1.7 below.

The benefits to the purchaser under this warranty are in addition to other rights and remedies under the Competition and Consumer 

Act 2010 (Cth).

The limited warranty period, within which a defect in the product must appear, commences from the date of purchase and ceases on 

expiration of the specified term below. 

 

The Limited Warranty Period

 

• Motor and pump assembly - 24 months 

• All Accessories: including the spray gun, lance, high pressure hose, wheels etc. - 12 months

The purchaser’s attention is drawn to the following

 

• To the extent permitted by law and subject to this Limited Warranty, and as part of the terms of the sale of the 

    equipment or part thereof:  Austech Industries shall not be liable for any form of loss, damage, cost, injury or 

    harm of any kind (whether direct, indirect, special or consequential) howsoever arising from the use or supply 

    of the equipment to the purchaser. 

 

Exclusions to Limited Warranty Policy

 

This Limited Warranty will not apply where the equipment or any part thereof: 

1.1  Fails due to an accident (including liquid spillage), abuse, misuse, neglect or normal wear and tear; 

1.2  Has been used in a manner other than for which it was originally designed; 

1.3  Has been tampered with or is otherwise than as supplied by Austech Industries; 

1.4  Where any damage, malfunction or other failure of the equipment or any part thereof resulted directly or 

        indirectly from unauthorized persons, adjusting or failing to adjust any part requiring normal maintenance 

        and service (examples include adjustment of tappets, air filter maintenance, lubrication and tightening of 

        screws nuts and bolts); 

1.5  Malfunctions due to the use of defective or incompatible accessories; 

1.6  Is damaged by lightning or thunderstorm activity; or 

1.7  Has been transported to a country where no authorised Service Agents exist.

Claiming warranty

 

This Limited Warranty may be claimed on in the following manner: 

2.1  In order to make a claim under this Limited Warranty, the purchaser must deliver the equipment or any part thereof to an 

Austech Industries authorised repair agent and pay all costs of transportation and all costs incidental to making a claim under this 

Limited Warranty.  The purchaser must first contact Austech Industries (contact details described above) and request the delivery ad-

dress of an Austech Industries authorised repair agent. 

 2.2  The purchaser must deliver to the repair agent written reasons why the purchaser considers that the purchaser has a claim 

under this Limited Warranty and must provide all necessary details, including: 

·          The place, date and from whom the unit or part was purchased. 

·          The unit or part involved, Model and Serial Number. 

·          The defect, malfunction or failure in respect of which the claim is being made. 

·          Proof of service of the unit or part (if applicable) 

·          Proof of purchase in respect of the unit or part. 

2.3  If the Limited Warranty claim is valid, the repair agent will carry out repairs and return the product at no charge to the purchaser.  

These repairs are limited to the Limited Warranty fault identified and as such will not include any other faults due to misuse, abuse, 

failure to maintain, fair wear and tear or the replacement of serviceable items such as oil, spark plugs, air filters, fuel etc. 

 

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.  You are entitled to a replacement or 

refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.  You are also entitled to have 

the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 

 

*  AR & SP are brand names of products distributed by Austech Industries 

Note #  Units which are failing to perform in accordance with specifications due to non-warrantable causes will be subject to freight, repair and or 

quote charges.

Summary of Contents for SP Jetwash SP140

















Reviews: