Aussie Predator Plus Operator'S Instruction Manual Download Page 2

Aussie Scud & Ultra … Operator’s Instruction Manual 

Aussie Pumps 

March 2018 

CONGRATULATIONS 

on  the  purchase  of  an  Aussie 

Scud professional high pressure water blaster. These 
top of the range machines have been designed to be 
easy to use, simple to service and offer reliability and 
performance. 

Before  attempting  to  operate  your  machine  please 
read this Instruction Manual thoroughly following all 
directions carefully.   By doing so you will ensure safe 
operation of the unit and will enjoy long and trouble 
free service from your heavy duty water blaster. 

 

GUARANTEE … EXCLUSIVE 4 YEAR PUMP WARRANTY 

 

This  Aussie  Eco  Clean  product  is  guaranteed  against 
faults  in  manufacture  for 

two years 

from  purchase. 

The 

Bertolini 

pump  has  a 

four year warranty

,  but 

must  be  serviced  by  an  authorised  service  agent 
every  six  months  to  maintain  this  warranty.  Keep 
your  receipt  as  proof  of  purchase  and  all  service 
receipts.    This  guarantee  is  invalid  if  the  product  is 
found  to  have  been  abused  in  any  way, or  not  used 
for the purpose for which it was intended.   

Routine  maintenance  is  the  owner’s  responsibility.  
Failure  to  maintain  the  machine  in  line  with  the 
services  outlined  on  the  back  page  will  invalidate 
warranty. High pressure  accessories carry a 3 month 
warranty. 

Where  possible  return  faulty  goods  to  the  place  of 
purchase.  No products can be returned to us without 
our prior permission.  The reason for return must be 
clearly state. 

N.B. 

Warranty is not transferrable to third parties 
in  the  event  of  sale  of  the  machine  within 
the  warranty  period.    Please  note  that  any 
parts  used  in  warranty  repairs  are 
guaranteed  for  a  period  limited  by  the 
original warranty of the parent product. 

Engine  warranty  is  the  responsibility  of  the  engine 
manufacturer. Unit  must be returned to authorised 
engine  dealer  for  evaluation  of  engine  warranty. 
(Refer to engine handbook). 

Battery  warranty  is  covered  by  Federal/Ryde 
Batteries, call (02) 9879 5422 for your nearest outlet. 

Our  goods  come  with  guarantees  that  cannot  be 
excluded  under  the  Australian  Consumer  Law.  You 
are  entitled  to  a  replacement  or  refund  for  a  major 
failure  and  for  compensation  for  any  other 
reasonably foreseeable loss or damage. You are also 
entitled to have the goods repaired or replaced if the 
goods fail to be of acceptable quality and the failure 
does not amount to a major failure. 

The benefits under the  Aussie Pump warranty are in 
addition  to  other  rights  under  Australian  Consumer 
Law. 

AUSSIE ECO CLEAN SCUD & ULTRA SERIES OPERATING & MAINTENANCE INSTRUCTIONS 

Contents: 

Warranty  ..............................................................  2 

Safety precautions  ...............................................  3 

Specifications  .......................................................  3 

Wheel & frame care  .............................................  3 

Assembly & preparation for use  ..........................  4 

      Machine preparation  ......................................  4 

      Hose connections ............................................  5 

      Before starting the machine  ...........................  5 

      Starting the engine  .........................................  6 

      Pressure washing  ............................................  6 

      Applying detergent  .........................................  7 

      Stopping the machine  ....................................  7 

Care & Maintenance  .........................................  7/8 

Troubleshooting  ...................................................  8 

Parts identification  ...............................................  9 

Replacement parts  .............................................. 10 

Resetting the safety valve  ..................................  11 

Pump parts  ....................................................  12-13 

Blaster Risk Assessment  .....................................  14 

Warnings  ............................................................  16 

Pressure cleaner daily checks  ............................  16 

Three monthly regular service  ...........................  16 

Summary of Contents for Predator Plus

















Reviews: