Aussie HP Accessories … making light work of cleaning chores
Australian Pump Industries Pty Ltd
7 Gladstone Road, Castle Hill NSW 2154
Ph: (02) 8865 3500 Fax: (02) 9894 4240
www.aussiepumps.com.au [email protected]
WEAR PROTECTIVE GOGGLES & CLOTHING!
WARNINGS
OVERSPEEDING
Do not operate machine at over 3200 rpm
(engine speed). Over speeding can cause
serious pump damage.
HIGH PRESSURE SETTING
The high pressure pump is factory set to operate
at its rated pressure. DO NOT ADJUST.
Tampering with the pressure regulator will void
warranty and can be DANGEROUS.
EXCESSIVE BYPASS
Do not run on excessive by-pass. Switch
machine off within five minutes of ceasing
operation as excessive by-pass can cause heat
build up in pump and subsequent damage.
Excessive bypass running voids warranty.
CHECK NOZZLE MONTHLY
If pressure drops off check nozzle for wear.
Nozzles should be replaced on a regular basis
(every month for machines in regular use, every
three months for machines used intermittently).
Using the machine with the incorrect nozzle size
or worn nozzle will void warranty and can be
DANGEROUS to the operator
.
PRESSURE CLEANER DAILY CHECK LIST
Check pump oil level
Check engine & gearbox oil level
Check nozzle for wear
Check all high pressure components for leaks:
gun/lance
HP hose
all fittings
Check water filter and clean regularly
Check unloader, safety valve and thermal
dump for leaks
THREE MONTHLY REGULAR SERVICE
All professional machines need to be thoroughly
serviced every three months. The service involved
should
include
the
engine
manufacturer's
recommendations (see separate Engine Manual)
and the following;
Change pump oil
Check filter for foreign debris
Check unloader, safety valve and thermal dump
for leaks
Check all HP components for leaks: Gun/lance,
HP hose and all fittings
Replace nozzles
Check gearbox to engine key for wear, if key is
worn see your local Aussie Eco Clean Service
Department. NB Damage generated by worn
keys is not covered by warranty.
