1
Rangehoods Installation Instructions
Thank you for purchasing an Aussie Traveller Rangehood
The Aussie Traveller Rangehood has been specifically designed for use in
a full range of RV installations including Caravans, Motorhomes, Cabins
and Boats where 12Volt power is used. Mounting and installation of the
Rangehood should be performed as per the following instruction and
installation manual.
Maintenance is required for all Aussie Traveller Rangehoods. Ensure the
vents are cleaned regularly by unclipping the vent from the body, rinsing
under hot water or cleaning in a dishwasher. Ensure the rear/top vent is
clean and clear of any debris. Ensure there are no obstructions in or
around the fan. Periodically check that the Rangehood remains secure
and has not moved or become loose during use or from travel.
Warranty. Your Aussie Traveller is covered by a 12 month product
warranty. Please read the warranty statement that is included with this
product.
Compliance. Installation of this unit in a Recreational Vehicle requires a
minimum distance between the underside of the rangehood and
cooktop heating surfaces (ie gas flame aperture, electric element) of a
minimum 450mm. Ensure all relevant installation regulations are
adhered to. Changes may be applicable as compliance and regulations
with various industries are amended.
Aussie Traveller Pack List – 530mm & 380mm
1.
Rangehood 1pcs
2.
Air outlet 1pcs
3.
Wind deflector 1pcs
4.
ST3.9
×
13 cross self-tapping nail with pan head 4pcs
5.
ST2.9
×
13 countersunk head cross tapping nails 2pcs
6.
ST4.2
×
13 cross self-tapping nail with pan head 4pcs
