Aussie Fit JS-4500, Owner'S Manual

Page: 10 / 21

9
(the data is for reference only, not as a medical data)
2.BUTTON FUNCTION:
“PROG” button: When machine in standby state, press this button to choose program 0:00,
P01-P02-P03 ----P15, FAT.
0:00, manual mode, the system default operating mode, the default speed 1.0 KM/H
P01-P15, inner install program.
FAT, FAT TEST MODE
“MODE” button: Press this button to choose the mode: 0:00, 15:00, 1.00, 50, (0:00 manual mode, 15:00 mode-time
count down, 1.00 mode-distance count down, 50 mode-calories count down) When choosing model , both speed
and incline button are used to set down count , after press "START" button to start the treadmill.
“START” button: When turn on Power and Safety lock combined, press this button at any time, start the
treadmill .
“STOP” button: Press this button to stop the machine, and clear and reset.
“ SPEED+”
、
“ SPEED-” : Press the button adjust the set point when machine in standby state . Adjust
the speed when running. The adjustment value of 0.1 km/times, when
holding more than 0.5 seconds automatically continue increasing or
decreasing.
“ ”
、
“INCLINE-”
：
Press the button adjust the set point when machine in standby state .
Adjust the incline when running. The adjustment value of 1length /times,
when holding more than 0.5 seconds automatically continue increasing or
decreasing.
SPEED
（
2,4
，
6,8,10
）：
Adjust the speed quickly
INCLINE
（
2,4
，
6,8,10
）：
Adjust the incline quickly
3 START-UP QUICKLY (MANUAL):
Attach the magnet end of the safety lock to the computer, press ‘ START’ button to start the machine, it
will run at the lowest speed, press “ SPEED+” “ SPEED-” to adjust the speed. When you would like to
stop machine, press the ‘ STOP’ button or take out the safety key directly
4 The operation when running
Press “speed-“ will reduce the operating speed of the treadmill.
Press “speed+“ will increase the operating speed of the treadmill.
Press “incline -“ will reduce the incline of the treadmill.
Press “i“ will increase the incline of the treadmill..
Press “stop” will slow down to stop running.
When the user hold the bar of hand heartbeat about 3 second, it could show the pulse data.
5 COUNT DOWN MODE:
When standby state, press the ‘ START’ button, the machine will run at the1KM/H speed and the
incline at 0 .The window will count forward from 0. At the same time, press button “SPEED+”
、
“SPEED-”
、
“”
、
“INCLINE-”change the speed and incline.