manualshive.com logo in svg

Ausrv LX, Owner'S Manual

Share
Download
Ausrv LX Owner'S Manual Download Page 6

www.marketdirect.com.au   

    

Ph: 1300 494 494

2

Load

Weighbridge

Reading must not exceed GTM Rating

Coupling Mass

Weighbridge

Reading = Tare Mass

Load

Coupling Mass

Weighbridge

Reading must not exceed ATM Rating

Section 1. Introduction

 

 

WELCOME TO AUSRV 

Off road camping is a rewarding way to travel and see our great country. Owning an AusRV Camper will afford you 
the opportunity to travel to remote places and stay in comfort. It is the intention of AusRV for you to have the best 
possible owner experience and enjoy the great outdoors. 

Terminology & Abbreviations

ATM (Aggregate Trailer Mass) Rating:

 The total permissible mass of the Trailer. This includes the coupling 

mass and whatever you add as payload (e.g. water, gas, luggage) 
up to the specified rating. The ATM Rating must not be exceeded.

GTM (Gross Trailer Mass) Rating: 

The total permissible mass that can be supported by the wheels/ tyres of 

the Trailer. This includes whatever you add as payload (e.g. water, gas, equipment and luggage), but does not 
include the mass supported by the tow vehicle.  
The GTM Rating must not be exceeded.

Tare Weight:

 The total weight of the trailer (load on tyres plus coupling load) with all options and fittings as 

supplied by the manufacturer, with empty water tanks, excluding fluids not essential for operation on public 
roads, and without luggage or personal effects.

Campers for illustration purposes only.

Summary of Contents for LX











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands