Ausrv LX, Owner'S Manual

Page: 23 / 74

www.marketdirect.com.au
Ph: 1300 494 494
19
Bearings and Seals
Bearings are a consumable item should be removed, inspected, and repacked with grease every 5,000km and
replaced every 10,000km as best practice. See maintenance schedule for guidance.
Safety Chains and Shackles
Rated shackles
Always use load rated shackles applicable to the weight of your trailer.
Attaching Chains
When attaching chains, you must always cross them and attach each chain to the diagonally opposite side of the
towbar. Ensure chains are not too long and where necessary attach to links further back from the end.
Periodically check the chains for visual wear or damage. If worn or damaged, arrange for these to be replaced with
approved, certified and suitably rated chains.
Connecting the Hitch
Towing with Trucks
If you intend to tow your camper with a truck or heavy commercial vehicle you should fit a hitch system to minimise
the lash effect of the commercial suspension and distance from the rear axle to the tow point. Truck suspension can
be harsh, particularly in off road conditions. The long distance between the axle centre and the point of attachment
can be quite long further exacerbating the effect putting stress on components. Using a shock absorbing hitch will
reduce the effect considerably.
Bearing Number:
Inner Bearing 25590
Cone: 25520
Outer Bearing:
25590
Cone: 25520
Seal:
55 x 85 x 12