Ausrv GT 2021, Owner'S Manual

Page: 34 / 79

www.ausrv.com Ph: 833 872 8778 34
12 Volt Electrical System
Control Panel
Main Rotary Switch: This is used to switch on or isolate the entire 12 volt system.
Circuit Breakers: The round rubber capped Circuit breakers are resettable. To reset the circuit push in the rubber cap.
Each circuit breaker is marked with applicable circuit.
Circuit Switches: Each circuit is individually switched so it may be isolated when not in use.
Voltmeter: This meter will show battery voltage/ state when not being charged and charge voltage when the charger is
activated. Resting voltage of a fully charged AGM battery bank will be 13 - 13.1 Volts.
Amp Meter: This meter will show current being drawn from the battery.
Internal Lights: The LED lights inside your trailer are individually switched at each light, with wall switch for groups
of lights. To use internal lights, ensure both wall switch and individual fitting switch are both on, as is the main rotary
switch.
External LED Lights: These lights are switch via the panel inside the main entry and on some models, the passenger side
lights may be switched from inside the side storage area nearest the light.
Towing Your Trailer
Driving dynamics change considerably when towing a trailer. Many facets of driving need to be modified when towing
for your safety and that of other road users.
Important points you must know, understand, and adhere to are:
• Do not exceed the manufacturer maximum capacities for the tow vehicle or trailer.
• Do not exceed the manufacturer capacity on hitch (770lbs for Cruisemaster DO35)
• Do not exceed the maximum Tongue weight allowance of the tow vehicle or trailer (whichever is lowest)