Ausrv GT 2021 Owner'S Manual Download Page 30

Page: 30 / 79

www.ausrv.com

Ph: 833 872 8778

Loading Your Trailer

Loading your trailer can have an effect on the overall handling of the trailer and tow vehicle combination. Loading
affects ball mass and balance which must be taken into consideration.

•

DO NOT exceed the Gross Vehicle Weight Rating (GVWR)

•

Always load cargo and luggage to keep weight even on both sides of the trailer.

•

Always load to achieve around 10% of total load as tongue weight. This is a generally recommended

standard to achieve a safe balance for handling.

Pre-Trip Inspection

Before any trip check the following

Tires

•

Correct tire pressures

•

Tires are in good condition free from damage and uneven wear.

•

Tread is of legal and acceptable depth.

Wheel Nuts

•

Ensure wheel nuts are tensioned to the correct torque using a torque wrench.

•

All wheel nuts are in place.

Hitch and Chains

•

Ensure hitch and chains are free of damage.

•

Hitch locking mechanism functions correctly.

•

Hitch is properly lubricated.

•

Hitch articulates correctly.

Fire Extinguisher

•

Extinguisher is properly mounted and within date.

•

Extinguisher charge gauge is in green.

Brakes & Breakaway System

•

Brakes operate correctly when both operated by manual control and via pedal.

Lights

•

Ensure all trailer lights are functioning

Summary of Contents for GT 2021















































































Search results

Summary of Contents for GT 2021

Reviews:

Related manuals for GT 2021

Brands by name

Popular brands

Ausrv GT 2021, Owner'S Manual

Search results

Summary of Contents for GT 2021

Reviews:

Related manuals for GT 2021

Brands by name

Popular brands