www.ausrv.com
Ph: 833 872 8778
24
Make sure the dust cap is securely connected to the bump cover. This is done by locating the rear lip on the dust cap
onto the groove of the bump cover and then pushing it in a downward motion until the dust cover is secure (there should
be a slight click when it has been assembled correctly) Test if the dust cover is connected to the bump cover by applying
a slight upward force to the dust cover, it shouldn’t separate.
This procedure should be applied if you are uncoupling or coupling up.
Summary of Contents for GT 2021
Page 46: ...www ausrv com Ph 833 872 8778 46 Schematics Electrical Diagram ...
Page 50: ...www ausrv com Ph 833 872 8778 50 Hub Assembly ...
Page 51: ...www ausrv com Ph 833 872 8778 51 Trailing Arms and Bushes ...
Page 75: ...www ausrv com Ph 833 872 8778 75 Trip Name Date Miles Start Miles Finish Cumulative Miles ...