Warm Milk
For making Warm Milk, follow the steps below:
1.
Make sure the frothing whisk and chocolate cover “ ” are properly attached
to whisk holder inside the milk jug before operation.
2.
Fill the jug with fresh milk up to Max level indicated for heating (600 ml).
3.
Connect the plug of milk frother to the power source according to its required
standard rating power supply.
4.
Turn the knob to the “ ” Warm Milk mode.
5.
Press the START/STOP button, the buzzer beeps once with the blue indicator
light, the motor and heater will start to work.
6.
Once the temperature reaches 50
o
C the machine ends operation. It beeps once
and the blue indicator light turns to white (STAND BY MODE).
7.
After 30-sec of not using the machine, the indicator light keeps flashing for
3 seconds with beeping 3 times and then stops and light turns OFF.
NOTE-1:
The heating and stirring option will be both functioning during this operation
mode to produce proper Warm Milk.
NOTE-2:
The chocolate cover whisk should be used for this function along with
frothing whisk to prevent the milk producing foam.
50
o
C
11
Add the milk
and select the
desired option
Press the
start button
and wait
Finish &
ready to use
Attach the
disk
Summary of Contents for AusFroth-06
Page 21: ......
Page 22: ...Questions or Inquiries support au auspure com V1 0222 ...
