Aurora ShredSafe WM1270MA User Manual Download Page 5

8

ENGLISH

9

ENGLISH

TROUBLESHOOTING

If there is a problem with your shredder, check below for the symptoms and steps to resolve. If you 
continue to have problems, contact customer support at our Service Center 

1-800-327-8508

DO 

NOT ATTEMPT TO REPAIR BY OPENING THE SHREDDER HEAD. This will completely void the 
product warranty.

 

The shredder does not work at all.

 

 

1)  

Make sure the unit is 

plugged in

 and that the outlet is in good working order.

2)

  

Overheating with extended use:

 In the event that the shredder has shred continuously 

beyond the maximum running time and overheated, the unit will automatically shut off. If this hap

-

pens, 

switch the shredder Off for 45 minutes

 or longer before resuming normal operation. 

3)

  Shredders with pull-out wastebaskets feature a safety power cut off upon bin removal. Shredder will

not function unless the pull-out wastebasket is pushed in all the way and properly set back into place.

4)

  

Be sure NOT to open the cover beyond the preset position

, otherwise the ShredSafe™

feature will be activated and the shredder will be inoperable. The “SHREDDER STATUS” indication line 
must align with the “READY” setting.

5)

  If using a plastic bag to line the wastebasket, please remove it. This may cause the shredder not to 

operate properly.

6)

  The activation sensor of the shredder is located near the center of the feed slot. Be sure to feed 

directly into the center area to activate the machine (especially applies to smaller pieces of paper 
or credit cards).

 

The shredder runs in “Rev (Reverse)” mode but not in “Auto (On)” mode.

1)

  While in “Auto” mode, the motor will not start running until paper is inserted into the feed slot. Set 

the unit to “Auto” and insert paper to shred. The sensor that activates the shredder in Auto mode 
is located directly in the center of the slot. If the paper you are inserting is narrow, it may not be 
activating the optical sensor. It is also possible that the feed slot has become blocked with paper. 
Insert an index card or any rigid sheet of cardstock (old greeting card or folded file folder), directly 

in the center of the feed slot, while applying force to help push the jammed paper through. This will 
usually clear any paper blockage.

CONTINUED NEXT PAGE

MAINTENANCE

 Warning: Failure to properly maintain your shredder will void the warranty.

 

Oil the shredder blades every month with basic vegetable, cooking oil or shredder oil. Follow oiling 

procedure below (FIGURE 4). It helps to keep the shredder blades operating well over many years of 

use.

Oiling procedure:

1. Turn off shredder.
2. Apply shredder oil across paper entry. 
3. Turn shredder in reverse mode for 3~5 seconds. 

• 

Do not spray or keep any aerosol products 

in or around shredder. 

• 

DO NOT USE CANNED AIR ON SHREDDER.

 CLEANING:

• ALWAYS UNPLUG THE SHREDDER BEFORE CLEANING!
• Only clean the shredder by carefully wiping the unit with a dry soft cloth or towel.
• Do not clean or immerse shredder in water. Having the unit wet may result in damage or malfunction to 

the electrical components. If the shredder happens to get wet, be sure to completely dry the unit immedi

-

ately with a cloth or towel.

• Never use anything flammable to clean the shredder. This may result in serious injury or damage to the product.

Cover over tilt

Disabled position

Ready position

FIGURE 4

Shredder

Oil

DO NOT USE

AEROSOL PRODUCTS!

!

 

 

Caution:

Summary of Contents for ShredSafe WM1270MA

















Reviews: