USERS GUIDE
www.auroramm.com
16
IPX-TC3A-WP3-C and IPX-TC3A-WP3-F Rear
Rear
48VDC:
48 Volt isolated power input.
SFP+:
For multi-mode or single mode SFP+ 10G modules (IPX-TC3A-WP3) for the IPBaseT zero
compression/latency connectivity.
10G:
RJ-45 10G network connections ((IPX-TC3A-WP3) for the IPBaseT zero compression/latency connectivity. Unit
can be powered with 10G PoE or PoH injector.
RS-232:
Serial port pass-through and control up to 115Kbps. Also, a 5V for connection to DXB-8 8 button wall
controller.
Expansion Slot for USB, ReAX, and Dante options. Cover supplied for card protection.
*
Note: Copper RJ-45 is tab down. Do not use a boot over the connector or it will be too snug. To release the
cable a flat head screwdriver should be used from the side to lift tab from underneath.
Wall plate versions require full 3 gang electrical box space. Some electrical boxes and mud rings do not
accommodate the full size. IPX-TCW3 wall box dimensions are 5.54” x 2.83” x 1.404”. Wall box portion depth is
1.404” without option card and 1.5" with option card.