③
The wall-mounting strips and bracket are assembled, as
shown below:
Step 3: Cabinet assembly
①
Combine every five cabinets into one column and assemble a
total of 5 columns;
②
Use the tool to hook and lock the panel up and down. The
position is shown in blue circle.
The connection position of left and right spring side locks are
shown in red circles, as shown below:
③
Install the hooks on the corresponding cabinets with two M8*25
hex head bolts and flat spring washers, as shown below:
④
The positioning pins shall be removed from the top cabinet. And
the spring positioning pins shall be removed from the leftmost
columns, and then fix the upper cover strip with a cross screwdriver,
as shown below:
09
upper cover strip
M8*16 cross recessed big flat head screws
positioning pin
spring positioning pin
M8*25 hex head bolt
and Flat metal washer
hook plate
