USERS GUIDE
www.auroramm.com
29
ReAX Commands
The device parameters can be controlled by ReAX commands. A Tcp server is running at the port 6970 which
listens for the ReAX command and responds in JSON format accordingly.
ReAX Command
String Format
Information
set_audio_route
set_audio_route
<route_from> <route_to>
Modify or set the audio routing.
Route From:
none, linein, dante, hdmi, remote_audio, arc
Route To
Lineout, dante, stream_audio, remote_audio
Eg:
set_audio_route linein lineout
set_audio_route linein stream_audio
aud_insert
aud_insert <video_port>
<enable/disable>
Enable or disable the audio insertion for each video
port
Video_port: in1, in2, in3, in4, stream(only for decoder)
Eg:
aud_insert in1 enable
set_volume
Set_volume <audio_port>
<volume_level>
Controls the linein and lineout volume.
Audio_port: linein, lineout
Volume_level: 0-100, mute, unmute
set_volume linein mute
set_volume lineout 85
set_ip
set_ip <ip_mode> <ip_addr>
<subnet> <gateway>
Configure the IP address of the device
Ip_mode: DHCP, static, auto_ip
Eg: set_ip static 192.168.1.101 255.255.0.0
192.168.1.1
