USERS GUIDE
www.auroramm.com
11
HT-TX1-WP2 Front & Rear
Front Left Side
•
In1/2 Button:
The blue backlit button will select HDMI 1 or 2 input.
•
HDMI Connectors:
Use with HDMI 2.0 or DVI sources like Blu-ray players, laptops, etc.
•
Dual USB 2.0 Connectors:
USB 2.0 480Mbps and supplies up to 1A of power between both ports.
Great for charging port of USB devices like phones and certain tablets. When in USB Host Mode the
bottom port is for PC (Type A to Type A cable is supplied) and upper port is charging only. When in
Device mode both ports work on a hub for mouse, keyboard, camera, memory stick, etc.
Front Right Side
•
Vent:
Allows the unit to run cooler and should be kept free of dust.
Rear Connections
•
48V DC
: Power connector for 48V DC power supply. If remote device can supply power over HDBaseT
then the local power is not required. Currently all receiver types from Aurora supply power over the
HDBaseT.
•
HDBaseT:
Connect CAT 5e/6/7 cable. Shielded cable is not necessary unless the environment has a
lot of electrically noise.
•
RS-232:
Connect RS-232 device up to 115k baud. Note there is a 5v line as it is designed to power the
DXB-8 8 button wall plate.
Note: Some 2 gang electrical boxes or mud rings have curved or beveled corners that may
