10
User Guide
Auto-switching Function:
New input
Once detecting a new input signal, the DXP-62 would switch to this new signal automatically.
Power rebooting
The DXP-62 offers the function to remember the signal last displayed when rebooting. Once
rebooting, it will automatically enter in auto-switching mode, and then detect all inputs and
memorize their connection status for future rebooting using. And if the signal last displayed is
still available, then it will choose the signal to output. If not, there will be no signal on outputs.
Signal removing
Once removing the current display signal, the DXP-62 will detect all input signals with priority
from INPUT 1 to INPUT 5. It will transfer the signal firstly detected to be available to outputs.
Note:
Auto-switching function works only when input with new signal, remove a signal or
power rebooting. With any VGA port set to AV or YPbPr, the system will be not able to enter in
Auto-switching mode.
Operation Examples:
Connect the INPUT 2, INPUT 4, and INPUT 5 ports to the source devices, select INPUT 4 to
outputs.
Press and hold on the front key
SOURCE
for
7 seconds or more
to enter in auto-switching
mode.
No signal removing or new input, the
DXP-62 just works in auto-switching mode, and will take no
action (Output from INPUT 4)
Connect INPUT 3 with a source device, and then it will choose INPUT 3 to output.
Remove the signal of INPUT 3, the
DXP-62 will detect from INPUT 1 to INPUT 5. When it
detects that input 2 is available, it will choose INPUT 2 to output.
Cut off the power of the
DXP-62, then reboot. With the DXP-62 is in auto-switching mode, it will
choose INPUT 2 to output.
