Aurora AU 4090, Manual

Page: 8 / 10

AU 4090
Mixer
ENG
8
Before installing the nozzle, make sure that the
power cord is not plugged in.
Before using the product, make sure that the
nozzle properly installed and secured.
Before connecting the mixer to the network,
make sure to that the speed selector is set to “0”.
Connect the power cord to an electrical outlet.
Immerse the nozzle installed in a container and
ingredients.
Using the switch, set the desired speed nozzles.
To enable maximum speed nozzles, press and
hold the «TURBO».
During operation, does not block the ventilation
holes on the sides.
Make sure that that would be in the vents are not
foreign objects and liquids.
OPERATION SHEET
CARE AND CLEANING
STORAGE
SPECIFICATIONS
Turn the switch to position «O».
Make sure that the motor has stopped completely.
Make sure that the motor has stopped completely.
Unplug this product from the mains.
For Beaters or beaters, holding them, press re
-
lease attachments.
Wash all parts in contact with food, warm water
and a mild detergent.
After that, wipe the metal parts with a dry cloth.
Do not immerse the blender into the water. Wipe
with a damp cloth.
Do not wash metal parts in the dishwasher!
Do not use abrasive or chemical cleaners.
Before storing, make sure that the mixer is unplugged.
Complete all items section CLEANING AND MAINTENANCE.
Keep the product in a dry and out of reach of children cool place.
Power source 220-240 V ~50 Hz
Power 300 Watt
This symbol on the product and packaging means that used electrical and electronic products and batteries should not be
mixed with general household waste. They need to take special reception points. For more information on the existing systems
of waste collection, contact the local authorities. Proper disposal helps to save valuable resources and prevent potential nega
-
tive efects on human health and the environment that may result from improper handling of waste.