background image

AU 

191

Праска

 \ 

Утюг

 \ 

Iron

ENG

11

CARE AND CLEANING

STORAGE

SPECIFICATIONS

Before cleaning the appliance make sure it is unplugged from the power supply and has completely 
cooled down. To clean the exterior of your iron, wipe over with a damp soft cloth and wipe dry. Never use 
harsh abrasives to clean the soleplate as these will damage it.

Empty the water tank and wind the power cord around the heel rest. To protect the soleplate from scratch-
ing, corroding or staining, always place the steam iron in an upright position on its heel rest.

Power source

220-230 V, 50 Hz

Power

2500 Watt

DRY IRONING

The steam iron can be used on the dry setting 

with or without water in the water tank, however 

it is best to avoid having the water tank full while 

dry ironing. Turn the variable steam control to the 

minimum position. 

ANTI-DRIP FEATURE 

This iron is equipped with an anti-drip feature 

that protects fabrics from water spotting even at 

low temperatures.

ANTI-CALC FEATURE

The appliance is equipped with an anti-calc fea-

ture that prevents scale build-up. 

AUTOMATIC TURN-OFF

This function turns the iron off automatically if 
the iron remains in horizontal position for more 
than 30 seconds or if the iron stands vertically for 
more than 8 minutes.

SELF-CLEANING 

Fill the water tank up to the maximum level and 

then close it.  Set the temperature control dial to 

its maximum position. Plug it to the power sup-

ply. Allow the iron to heat up until the indica-

tor light goes out. Holding the iron horizontally 

over the sink, change the steam control to the 

“Self-clean” position and press the steam button.  

Boiling water and steam will be ejected from the 

holes in soleplate with impurities washed out. 

Rock the iron forwards and backwards during this 

operation. Repeat self-cleaning if you notice that 

much impurity has been washed out. Move the 

iron over an old piece of cloth.

WHEN YOU FINISHED IRONING

Set the iron vertically. Turn the temperature con-

trol dial to “Min”.  Unplug the iron from the power 

supply. Let it cool down completely. Wind the 

cord. Store the appliance vertically, to avoid dam-

aging the surface. 

CAUTION! 

Empty the iron’s water tank after each use. 

Reviews: