Aurora AU 191, Manual

Page: 9 / 12

AU
191
Праска \ Утюг \ Iron
ENG
9
Read these instructions carefully before using the
appliance, in order to avoid handling damage.
Incorrect handling can result in damage to the
appliance, property loss or personal injury.
The appliance is intended for household use only.
Do not use for industrial purposes.
Before connecting the iron for the first time,
check that your mains voltage corresponds to
that indicated on the rating label.
Do not use outdoors and in rooms with high hu-
midity.
Do not immerse the appliance and cord in water
or any other liquids.
Never yank the cord disconnecting the iron from
the outlet; instead, grasp the plug and pull to dis-
connect.
Keep the cord away from hot surfaces and sharp
edges.
Always unplug the iron from the power outlet be-
fore filling or emptying the water tank and when
not in use.
Do not operate the appliance with a damaged
cord or plug, or after it has been immersed in wa-
ter, or damaged in any manner.
To avoid the risk of electric shock, do not attempt
to disassemble or repair the appliance by your-
self.
If the cord is damaged, it must be replaced at an
authorized service center, in order to avoid hazard.
Contact the nearest service centre for examina-
tion, repair or adjustment of the iron.
Close supervision is necessary for this appliance
being used near children.
Do not let children use the iron.
Do not leave the iron unattended while connect-
ed or on an ironing board.
Place the appliance on an ironing board carefully,
in order to avoid damaging the soleplate.
Be careful not to touch hot metal parts of the iron.
Be careful around zippers and similar items to
prevent the soleplate from scratching.
Do not place the iron on metal or rough surfaces.
This appliance is not intended for use by persons
(including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that
they do no play with the appliance.
Never leave the iron unattended while in use.
CAUTION
Do not operate another high wattage appliance
on the same circuit, to avoid a circuit overload.
If the appliance has been exposed to tempera-
tures below 0ºC for some time, it should be kept
at room temperature for at least 2 hours before
using.
SAFETY PRECAUTIONS
Remove the protective cover and gently rub with a dampened cloth.
Some parts of the iron were greased during manufacture, and as a result, the appliance may slightly
smoke when switched on for the first time. After a short while, this will cease.
BEFORE FIRST USE