There are no repeat values for Telnet Actions. The Action will execute only once each time the owning
Event is triggered.
Use the “Timeout in” value to have the Action abort, if it doesn’t complete before the time-out period
expires.
DIO
A DIO Action sends an Output Value of “High” or “Low” to the specified port. The state of the DIO port
will change only if the port is set as an output. You can check whether a port is set as an input or output
using the DIO diagnostics (see Digital I/O Diagnostics, page
).
Relay
A Relay Action turns a relay on or off. Set the “Output value” to the state you want the Action to set the
relay to.
IR Port
IR Port Actions send learned IR Commands (see IR Learning, page
) to the specified port. The IR
Summary of Contents for WACI NX-22
Page 36: ......
Page 53: ...Finally drag and drop selected files from your File Explorer...
