Parity
A parity check bit is the most significant bit of each ASCII coded character. Select the parity
type according to host device requirements.
Select Odd parity and the parity bit value is set to 0 or 1, based on data, to ensure that an
odd number of 1 bits are contained in the coded character.
Data Bits
This parameter allows the scanner to interface with devices requiring a 7-bit or 8-bit ASCII
protocol.
Stop Bit Select
The stop bit(s) at the end of each
transmitted character marks the end of transmission of one
character and prepares the receiving device for the next character in the serial data stream. The
number of stop bits selected (one or two) depends on the number the receiving terminal is
programmed to accommodate. Set the number of stop bits to match host device requirements
No Parity
* 7 Data Bits
* 1 Stop Bit
2 Stop Bits
No Parity
Parity Odd
* Parity Even
Parity Mark
Parity Space
Auro 2908
12
Parity & Data Bits & Stop Bit Select
