15
GB
Remove the plastic strip sticking out of the battery com-
partment.
Note:
The LC display will now perform a quick function check
and starts receiving the DCF signal (for details please refer to:
automatic and manual DCF signal activation). This process
may take a few minutes and is indicated by the DCF symbol
flashing in the info field 7 .
Upon successful reception of the radio signal the DCF symbol
will stop flashing.
The radio controlled alarm clock is now in clock mode and in-
dicates the current time (CET - Central European Time). It also
indicates the date, weekday in German and the temperature
in °C.
Note:
If you are located in a time zone other than Central
European Time or wish to display the weekday in another
language, it must be manually set. Please refer to chapter
„Changing basic settings“.
Note:
If the radio controlled alarm clock is unable to receive
a signal after 7 minutes, the DCF symbol will turn off. In this
case, possibly change the location of the radio controlled
alarm clock and start reception of the radio signal manually.
Summary of Contents for 88977
Page 3: ...3 1 2 3 4 5 A...
Page 4: ...4 DST B 14 11 15 7 6 9 8 13 10 12...
Page 5: ...5 C 16...
Page 6: ...6 D 17...
