Auriol 365824 2010, Usage And Safety Instructions

Page: 44 / 60

- 42 -
Protect sensitive surfaces before setting up, as otherwise scratches can occur.
Make sure that:

adequate ventilation is always ensured (do not place the radio-controlled
weather station on shelves or where curtains or furniture cover the ventilation
slots (
23
) and leave at least 10 cm space on all sides);

the radio-controlled weather station is not placed on a thick carpet or bed
during operation and there are no direct sources of heat (e.g. heaters) acting on
the radio-controlled weather station;

no direct sunlight hits the radio controlled weather station;

contact with water spray and water drops is avoided;

the radio-controlled weather station is not hanging or standing in the immediate
vicinity of magnetic fields (e.g. loudspeakers);

no foreign bodies and dust can enter;

candles and other open flames must be kept away from this radio-controlled
weather station at all times to prevent the spread of fire.
Set up the rain gauge securely
Place the rain gauge in such a way that it can detect direct weather influences and
the water cannot damage the place where it is set up. Because the water is
released again directly after the measurement through the drainage holes (
28
).
The battery compartment in the rain gauge has protection class IPX4 and is
therefore protected against splash water. The rain gauge can be attached to a
horizontal surface with screws. Without attachment, the rain gauge may fly
around in gusts of wind and a risk of injury cannot be ruled out. Use suitable
screws (not included in the scope of delivery) for fastening. The 4 holes (
32
) for
this are in the bottom of the rain gauge.
Make sure that:

the rain gauge is level, use the built-in spirit level (
27
);