Auriol 365824 2010, Usage And Safety Instructions

Page: 51 / 60

- 49 -
TOTAL - total (since the radio controlled weather station was put into operation).
You can read off the amount of rain on the rainfall diagram (
2
) or on the rainfall
display (
18
).
In a precipitation display mode, press and hold the rain / RESET button (
11
) to
delete the associated memory data set.
While it is raining, the raindrops flash in the display above the rainfall
diagram (
2
).
Alarm
Activate and deactivate alarms
In the normal time display, press the Alert button (
10
) to switch between the
alarms (ALARM 1-alarm 1, ALARM 2-alarm 2, ALERT-rain alarm). In the selected
alarm display mode, press the MODE / 12H / 24H button (
12
) to switch the
alarm ON. The following appears:
ALARM 1- (
8
), ALARM 2- (
8
), ALERT- (
3
) in the display. In the
selected alarm display mode, press the MODE / 12H / 24H button (
12
) to
switch the alarm OFF. The alarm symbols are not visible in the display.
Setting the alarm
In an alarm display mode (ALARM 1, ALARM 2), keep the Alert
button (
10
) pressed, the hours flash and you set them with the down / rain
gauge query / MAX / MIN button
( 13
) or the up / history - / radio restart
button (
9
). Press the Alert button (
10
) again to confirm the setting. The minutes
flash and can be set in the same way.
Press the Alert button (
10
) repeatedly until you return to the normal display or
wait 10 seconds.
Snooze function (SNOOZE)
When the alarm sounds, press the
SNOOZE / LIGHT
button
(1)
to
temporarily deactivate the alarm.
Z
Z flashes in the display. The alarm will