Auriol 314695, Operating Instructions Manual

Page: 112 / 162

AHFL 433 B2
■ 108
│
GB
│
MT
NOTE
If no outdoor temperature and humidity is displayed within
around 3 minutes, the weather station will stop the reception
search. The reception symbol
goes out, and and
are displayed on the outdoor display .
It is possible that no signal can be received due to the sur-
rounding buildings or because the distance is too great.
If you are unable to establish an automatic connection to the
outdoor sensor, you can do this manually:
♦ Press and hold the button until the reception signal
flashes on the outdoor display .
♦ Press the TX button 6 to manually initiate the outdoor
sensor radio signal.
The weather station automatically starts to receive the DCF signal
after 3 minutes, irrespective of whether the outdoor sensor
reception search has been successful or not. The reception
symbol flashes on the time panel
. If the reception symbol
is not flashing completely ( ) on the display, this means that the
reception of the DCF signal is too weak and the time cannot be
synchronised. Try and find a set-up location in which the recep-
tion symbol ( ) flashes completely on the display.
If the DCF signal is successfully received, the current Central
European Time (CET) is displayed on the time panel
. In
addition, the reception symbol is permanently displayed on
the time panel
.