- 5 -
Lap time measurement
Press button A to start the stopwatch- press button B to stop the stopwatch
and read the lap time, the stopwatch will continue to count internally. Press
button B again to show the running stopwatch time. This process can be
repeated as often as desired. Press A to stop the stopwatch and read the
stopped time.
Speed setting
When setting press and hold A or B to use the speed setting feature.
Adjusting the stopwatch hands
If the small stopwatch hands are not exactly in the "60" (12 o'clock
position) they must be adjusted manually. Carefully pull the crown out to
the stop. Repeatedly press button A to set the hands counter-clockwise to
"60" (12 o'clock position). Repeatedly press button B to set the hands
clockwise to "60" (12 o'clock position). Press the crown back to the initial
position.
Band shortening for the models 2-LD4276-1+2+6
Band shortening can be accomplished by removing links. Open the band
clasp safety and open the clasp. The band is held to the clasp by a spring
bar.
Image 1.
Compress and remove the spring bar by using a pointed
tool. Now place the watch face down on a soft surface.
Image 2.
The
- 6 -
links that can be removed are marked with an arrow.
Image 3.
Place the
band in the band changing tool in such a way that the pointed end of the
tool points directly at the metal rod and the metal rod can be pushed out in
the direction of the arrow. Carefully turn the screw clockwise until the metal
rod is pushed out a small distance. The rod can now be pulled out (using
pliers if necessary). The strap can now be taken disassembled. Remove as
many links as necessary using this method. Reinsert the rod in the opposite
direction of the arrow and push it back into the band. The strap and clasp
can now be reassembled.
A replacement tip for the tool is included in the bottom of the tool.
An instructional video is available for online viewing at the following URL:
http://specials.lidl.com/videos/nou9nohN/
...or simply scan the following QR code:
Band shortening for the model 2-LD4276-4
The band includes a moveable clasp for easy band shortening.
1.
Push a suitable tool into the opening on the clasp and lever the clasp
open.
2.
Move the clasp to the required length and let it snap into place on the
horizontal grooves on the back side of the strap.
Securely re-engage the clasp.